Clean Hand Dryer
AHD-6 is imported directly from Japan. With the original air-exhaust nozzle, the blowing speed as high as 190m/sec can increase the drying capacity by two folds.
- Improve drying performance: An original air-exhaust nozzle and DC brushless motor are adopted. The blowing speed reaches as high as 190m/sec. The ejected air can effectively prevent the water drops from spreading outward during the drying process.
- Increase the convenience of cleaning the drying tank: Minimize the concave and convex structure in the tank to enhance the convenience of cleaning.
- The structure is easy for maintenance: The pre-filter and water pan are set at the bottom. This makes daily routine maintenance operation easier.
|Filter efficiency||Particles above 0.3µm(dust in air) 99.99% above|
|Dust collection element||Main filter:HEPA filter|
|Pre filter:non-woven fabric filter|
|Blowing wind speed||About 190m/sec|
|Air volume||About 1.3m3/min|
|Structure||Body:Steel plate with bake painting|
|Ectemal case above:Aseptic ABS resin|
|Drying tank:SUS304(hair-line surface treatment)|
|Color of bake painting||Body:Grayish white Semi-gloss(ACT-7)|
|Power source||AC100V 1Ø 50/60Hz|
|Power consumption||About 980W|
|Power supply||About 1400VA|
|Noise level||About 83dBA(500mm apart from the body, 1,000mm apart from the floor)|